Per page:  

Petra SKU: PIOGMME300X1C
Part No.: 393715
Vendor SKU: GM-ME300X1C
Retail Price: $400.00
  • 300 watts RMS x 1 channel at 4 ohms; 300 watts RMS x 1 channel at 2 ohms; allowable load impedance: 2 ohms to 8 ohms
  • Designed to power subwoofer in marine and powersports applications; 14.4-volt amp works with 10.8-volt to 15.1-volt power source; negative grounding system
  • Frequency response, subwoofer channel: 10 Hz to 240 Hz; adjustable bass boost: 50 Hz
  • Crossover network subwoofer channel, LPF: 25 Hz to 240 Hz
  • Speaker line input sensor; 2-channel RCA input
  • Dust ingress protected (IP67) and water immersion protected at a max of 30 minutes at 3.28 ft.; SAE J1171 certified for external ignition protection of Marine Electrical Devices and covers all electrical devices suitable for use in marine engine compartments and fuel tank space
  • Extremely flexible in a variety of environments; sealed top chassis cover is removable to access adjustment settings
  • Class D; 32-bit floating-point DSP modulates input signal to improve audio performance for highest levels of accuracy, stability, channel symmetry, and high signal-to-noise performance
  • Microprocessor enables and controls amp's audio, power, and protection circuits
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature; automatically adjusts amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Includes rubber covers, in-line fuse, power harness, RCA speaker line input cable, installation hardware, owner's manual, and 1-year warranty sheet

Petra SKU: PIOMVHS322BT
Part No.: 393725
Vendor SKU: MVH-S322BT
Retail Price: $120.00
  • 50 watts x 4 channels max power output with five 4-volt preamp outputs for speaker and subwoofer hookup
  • Designed to replace existing, older single-DIN head units in order to add updated features such as Bluetooth and smartphone compatibility
  • 2-line VA LCD display with LED backlight
  • Smart Sync app compatible; expands unit's features to include Alexa and user interface-unit's rotary knob will trigger system to read messages out loud and bass boost button activates dynamic bass enhancer effect
  • Bluetooth audio streaming and hands-free calling to keep hands on the wheel and eyes on the road for safety; dual phone connectivity plus 5-phone registration
  • Android and iPhone connectivity; compatible with Spotify and Pandora
  • Audio file playback via USB: AAC, FLAC, WAV, MP3, WMA
  • USB input for media or charging, USB direct control for iPhone 5s and newer, and aux input
  • MIXTRAX takes music from an iPhone or USB device and plays it back with added transitions and effects
  • AM/FM tuner; 18 FM and 6 AM station presets
  • 13-band customizable graphic equalizer (expands to 31 with Smart Sync app), manual Time Alignment, Advanced Sound Retriever, and listening position selector
  • Steering wheel control ready
  • Includes wiring harness, microphone with bracket, installation hardware, quick-start guide, and 1-year warranty sheet

Petra SKU: PIOTSWX400DA
Part No.: 393726
Vendor SKU: TS-WX400DA
Retail Price: $380.00
  • 9 in. x 5-1/2 in. rectangular subwoofer driver (8-in. effective surface area) with built-in 250-watt-max (100-watt-RMS) Class D amplifier
  • Designed to add extra bass in space-challenged vehicles; compact enclosure for installation flexibility such as under seats or in small spaces
  • Frequency response: 20 Hz to 100 Hz
  • IMPP composite cone material, urethane surround, stamped metal basket, and 26.8-oz. magnet weight
  • Wired digital bass control allows you to match subwoofer output to your listening preference and vehicle interior
  • DEEP mode for rich, deep bass sound quality in your car; ideal for classic, jazz, country music, etc.
  • DYNAMIC mode emphasizes powerful, strong, and dynamic bass sound in the car; ideal for EDM, hip-hop, rock music, etc.
  • Includes wired remote with attached 16.2-ft. cable, 16.5-in. power harness with in-line fuse, 2 mounting plates, cable strain relief bar, 6 screws, 1-1/2-in. hook-and-loop fastener pad, instruction manual, and warranty sheet

Petra SKU: PIOCDME300
Part No.: 394630
Vendor SKU: CD-ME300
Retail Price: $120.00
  • Designed for marine use (IPX7); water- and splash-resistant at a submerged depth of up to 3.28 ft. (1 meter) for up to 30 minutes
  • Compatible with Pioneer MVH-MS512BS and MVH-MS310BT marine head units
  • Outer diameter: 2.5 in. 963 mm)
  • Cutout diameter: 1-7/8-in. (48 mm)
  • Includes 25 ft. extension cable, mounting hardware, and owner's manual

Petra SKU: PIODMH2660NEX
Part No.: 394418
Vendor SKU: DMH-2660NEX
Retail Price: $550.00
  • 50 watts x 4 channels max power output with six 4-volt preamp outputs for speaker and subwoofer hookup
  • Designed to replace existing, older double-DIN head units in order to add updated features such as Bluetooth, iOS and Android smartphone compatibility, and digital media playback
  • 6.8-in. capacitive touch screen with WVGA 800 x 480 screen resolution; color customization with 5 display colors and 112 key colors
  • Bluetooth audio streaming and hands-free calling to keep hands on the wheel and eyes on the road for safety; dual phone connection
  • Wired Apple CarPlay and Android Auto
  • Compatible with Alexa when paired with Pioneer Vozsis app
  • Also compatible with Spotify, Pandora, and Siri Eyes Free
  • Audio and video playback and image display via USB; supports MP3, WMA, AAC, WAV, FLAC, AVI, MPG, DivX, 3GP, MKV, MOV, FLV, WMV, ASF, M4V, TS, M2TS, MTS, H.263, and H.264 files; BMP, JPEG, and PNG image files
  • Backup camera input with parking assist lines plus second camera input, 3.5 mm aux input, and RCA video output
  • AM/FM tuner with 18 FM and 6 AM station presets; 13-band graphic EQ; SiriusXM ready (tuner sold separately)
  • Steering wheel control ready (adapter sold separately)
  • Compatible with iDataLink Maestro to keep factory features while expanding in-vehicle connectivity
  • Includes wiring harness, remote plus battery, 58-in. USB extension cable, wired Bluetooth microphone, screws, installation manual, quick-start guide, and warranty sheet

Petra SKU: PIODMHWC6600NEX
Part No.: 394439
Vendor SKU: DMH-WC6600NEX
Retail Price: $1,300.00
  • 50 watts x 4 channels max power output with six 4-volt preamp outputs for speaker and subwoofer hookup
  • Designed for applications, often in newer vehicles, with limited depth behind dash that can't accept single-or double-DIN aftermarket units; touch screen and single-DIN chassis are separate and designed to be mounted in different locations or configurations
  • 9-in. modular, non-DIN sized, capacitive touch screen with HD 1280 x 720 screen resolution; color customization with 5 display colors with 112 key colors
  • Bluetooth audio streaming and hands-free calling to keep hands on the wheel and eyes on the road for safety; dual phone connection
  • Wired or wireless USB Android Auto and Apple CarPlay for compatibility with both kinds of smartphones; Alexa built in
  • Also compatible with Spotify, Pandora, and Siri Eyes Free
  • Audio file playback via USB: MP3, WMA, AAC, FLAC, and DSD
  • Video/image file playback via USB: AVI, MPG, DivX, 3GP, MKV, FLV, WMV, ASF, M4V, H.263, H.264, TS, M2TS, MTS, BMP, JPEG, and PNG
  • AM/FM tuner with HD Radio; 18 FM and 6 AM station presets; SiriusXM ready (tuner sold separately)
  • Backup camera input with selectable parking assist lines, second camera input, 3.5 mm aux input, HDMI micro input, and RCA video output
  • Steering wheel control ready (adapter sold separately)
  • Compatible with iDataLink Maestro to keep factory features while expanding in-vehicle connectivity and Axxess Integrate data interface to display vehicle information on-screen
  • Includes monitor, chassis, wiring harness, preout A/V harness, 58-in. USB-C extension cable, USB-C to USB-A adapter, wireless remote with battery, Bluetooth microphone with bracket, GPS antenna with cable, installation screws and clips, mounting brackets, installation manual, warranty sheet, and quick-start guide

Petra SKU: PIODMHWT8600NEX
Part No.: 394419
Vendor SKU: DMH-WT8600NEX
Retail Price: $1,800.00
  • 50 watts x 4 channels max power output with six 4-volt preamp outputs for speaker and subwoofer hookup
  • Designed to replace existing, older single-DIN head units in order to add updated features such as Bluetooth, smartphone compatibility, a larger screen, and digital media playback
  • 10.1-in. adjustable and floating capacitive touch screen with 720p HD 1280 x 720 screen resolution; color customization with 5 display colors and 112 key colors
  • Bluetooth audio streaming and hands-free calling to keep hands on the wheel and eyes on the road for safety; dual phone connection
  • Built-in Alexa
  • Android Auto and Apple Carplay wired or wireless connectivity
  • Also compatible with Pioneer CarAVAssist app to customize home screen as well as Spotify, Pandora, and Siri Eyes Free
  • Audio file playback via USB: MP3, WMA, WAV, AAC, DSD, and FLAC
  • Video/image file playback via USB: BMP, JPEG, PNG, AVI, MPEG, DivX, MP4, 3GP, MKV, FLV, WMV, ASF, M4V, H.263, H.264, TS, M2TS, and MTS
  • AM/FM tuner with 18 FM and 6 AM station presets; HD Radio; SiriusXM ready (tuner sold separately)
  • USB, backup camera with parking assist lines, A/V or second camera, 3.5 mm aux inputs, and HDMI Micro Type-D; RCA video output
  • Compatible with iDataLink Maestro to keep factory features while expanding in-vehicle connectivity and Axxess Integrate data interface to display vehicle information on-screen
  • Includes wireless remote with battery, wiring harness, mounting brackets, 58-in. USB extension cable, microphone with bracket, GPS antenna, installation hardware, installation manual, warranty sheet, and quick-start guide

Petra SKU: PIOMVHMS512BS
Part No.: 394635
Vendor SKU: MVH-MS512BS
Retail Price: $170.00
  • 50 watts x 4 channels max power output with six 4-volt preamp outputs for speaker and subwoofer hookup
  • Designed to replace existing, older single-DIN marine head units in order to add updated features such as Bluetooth, smartphone compatibility, and satellite radio compatibility
  • 2-line white VA LCD display with black characters for higher outdoor visibility; LED backlight; dual-zone color illumination with 210,000 color choices and 10-level brightness control
  • Smart Sync app compatible; expands unit's features to include Alexa and user interface-unit's rotary knob will trigger system to read messages out loud and bass boost button activates dynamic bass enhancer effect
  • Bluetooth audio streaming and hands-free calling to keep hands on the wheel and eyes on the road for safety; dual phone connectivity plus 5-phone registration
  • Android and iPhone connectivity; compatible with Spotify, Pandora, and Siri Eyes Free
  • Audio file playback via USB: AAC, FLAC, WAV, MP3, and WMA
  • USB input for media or charging, USB direct control for iPhone 5s and newer, and aux input
  • MIXTRAX takes music from an iPhone or USB device and plays it back with added transitions and effects
  • AM/FM tuner; 18 FM and 6 AM station presets; SiriusXM ready (tuner sold separately)
  • 13-band customizable graphic equalizer (expands to 31 with Smart Sync app), manual Time Alignment, Advanced Sound Retriever, and listening position selector
  • Steering wheel control ready (adapter sold separately); accepts optional remote
  • Includes wiring harness, microphone with bracket, installation hardware, quick-start guide, and warranty sheet

Petra SKU: PIOGMDX874
Part No.: 394620
Vendor SKU: GM-DX874
Retail Price: $300.00
  • Max power output: 1,200 watts; 200 watts x 4 channels at 4 ohms; 600 watts x 2 channels at 4 ohms bridged
  • RMS power output: 100 watts x 4 channels at 4 ohms, 125 watts x 4 channels at 1 ohm, 150 watts x 4 channels at 2 ohms, and 300 watts x 2 channels at 4 ohms bridged
  • 1-ohm to 8-ohm allowable load impedance
  • Designed to power automotive speakers and subwoofers
  • Class D technology makes it smaller in size for greater installation options
  • Frequency response: 10 Hz to 50 kHz; Hi-Res Audio certified
  • 50 Hz bass boost
  • Made from high-quality, textured aluminum panel and tough frame plus high-quality audio components for long life
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature to automatically adjust amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Gold-plated RCA terminals for accurate signal with increased electrical conductivity; prevent corrosion and provide enhanced durability with excellent wear resistance
  • Fuse rating: 30 amps x 2
  • Dimensions: 9-7/8 in. x 2-3/8 in. x 8-1/2 in.
  • Weight: 5.5 lbs. (not including leads for wiring)
  • Includes 2 installed ATO fuses, bass boost remote and control cable, speaker level to RCA input adapter, installation screws, wire terminal tool, owner's manual, and warranty sheet

Petra SKU: PIOGMDX971
Part No.: 394622
Vendor SKU: GM-DX971
Retail Price: $380.00
  • 2,400 watts max x 1 channel at 1 ohm, 1,000 watts x 1 channel at 4 ohms; 500 watts RMS x 1 channel at 4 ohms; 1,200 watts RMS x 1 channel at 1 ohm; 800 watts RMS x 1 channel at 2 ohms; 1-ohm to 8-ohm allowable load impedance
  • Designed to power automotive subwoofers
  • Class D technology makes it smaller in size for greater installation options
  • Frequency response on subwoofer channel: 10 Hz to 240 Hz
  • Made from high-quality, textured aluminum panel and tough frame plus high-quality audio components for long life
  • Variable LPF from 40 Hz to 240 Hz makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences; bass boost at 50 Hz
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature to automatically adjust amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Gold-plated RCA terminals for accurate signal with increased electrical conductivity; prevent corrosion and provide enhanced durability with excellent wear resistance
  • Fuse rating: 40 amps x 3
  • Dimensions: 11-7/8 in. x 2-3/8 in. x 8-1/2 in.
  • Weight: 6.8 lbs. (not including leads for wiring)
  • Includes 3 installed ATO fuses, bass boost remote and control cable, speaker level to RCA input adapter, installation screws, wire terminal tool, owner's manual, and warranty sheet

Petra SKU: PIOGMDX975
Part No.: 394623
Vendor SKU: GM-DX975
Retail Price: $470.00
  • Max power output: 2,000 watts; 150 watts x 4 channels at 4 ohms + 700 watts x 1 channel
  • RMS power output: 75 watts x 4 channels + 350 watts x 1 channel at 4 ohms, 100 watts x 4 channels + 600 watts x 1 channel at 2 ohms, 200 watts x 4 channels + 350 watts x 1 channel at 4 ohms bridged
  • 2-ohm to 8-ohm allowable load impedance
  • Designed to power automotive speakers and subwoofers
  • Class D technology makes it smaller in size for greater installation options
  • Frequency response, main channels: 10 Hz to 50 kHz; Hi-Res Audio certified
  • Frequency response, subwoofer channel: 10 Hz to 500 Hz
  • 50 Hz bass boost
  • Made from high-quality, textured aluminum panel and tough frame plus high-quality audio components for long life
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature to automatically adjust amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Gold-plated RCA terminals for accurate signal with increased electrical conductivity; prevent corrosion and provide enhanced durability with excellent wear resistance
  • Fuse rating: 30 amps x 3
  • Dimensions: 11-7/8 in. x 2-3/8 in. x 8-1/2 in.
  • Weight: 7.3 lbs. (not including leads for wiring)
  • Includes 3 installed ATO fuses, bass boost remote and control cable, speaker level to RCA input adapter, installation screws, wire terminal tool, owner's manual, and warranty sheet

Petra SKU: PIOGMDX871
Part No.: 394621
Vendor SKU: GM-DX871
Retail Price: $270.00
  • 1,600 watts max x 1 channel at 1 ohm; 800 watts RMS x 1 channel at 1 ohm; 500 watts RMS x 1 channel at 2 ohms; 300 watts RMS x 1 channel at 4 ohms; 1-ohm to 8-ohm allowable load impedance
  • Designed to power automotive subwoofers
  • Class D technology makes it smaller in size for greater installation options
  • Frequency response on subwoofer channel: 10 Hz to 240 Hz
  • Made from high-quality, textured aluminum panel and tough frame plus high-quality audio components for long life
  • Variable LPF from 40 Hz to 240 Hz makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences; bass boost at 50 Hz
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature to automatically adjust amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Gold-plated RCA terminals for accurate signal with increased electrical conductivity; prevent corrosion and provide enhanced durability with excellent wear resistance
  • Fuse rating: 40 amps x 2
  • Dimensions: 9-7/8 in. x 2-3/8 in. x 8-1/2 in.
  • Weight: 6 lbs. (not including leads for wiring)
  • Includes 2 installed ATO fuses, bass boost remote and control cable, speaker level to RCA input adapter, installation screws, wire terminal tool, owner's manual, and warranty sheet

Petra SKU: PIOTSD12D2
Part No.: 394637
Vendor SKU: TS-D12D2
Retail Price: $260.00
  • 1,500-watt maximum, 500-watt RMS power output; 2-ohm impedance
  • Designed to boost low end of a vehicle's audio system
  • Frequency response: 20 Hz to 4.7 kHz; sensitivity: 76 dB
  • Cone made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass
  • Butyl rubber surround keeps cone moving in linear direction, seals cone to basket, and quickly dampens cone vibration once signal has changed or stopped for less distortion and superior frequency response
  • 12-in. dual-voice-coil woofer; oversized 4-layer voice coils, high-energy 73.6-oz. double-stacked magnets, and vented pole yoke increase overall power handling and SPL output with no sacrifice in sound quality
  • Can be mounted in sealed or ported enclosure
  • Mounting depth: 6-1/8 in.
  • Cutout dimensions: 11-1/8 in.
  • Includes trim ring, mounting screws, adhesive-backed foam gasket, manual, and warranty information
  • Each

Petra SKU: PIOTSD12D4
Part No.: 394642
Vendor SKU: TS-D12D4
Retail Price: $260.00
  • 2,000-watt maximum, 600-watt RMS power output; 4-ohm impedance
  • Designed to boost low end of a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 20 Hz to 4.7 kHz; sensitivity: 78 dB
  • Cone made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass
  • Butyl rubber surround keeps cone moving in linear direction, seals cone to basket, and quickly dampens cone vibration once signal has changed or stopped for less distortion and superior frequency response
  • 12-in. dual-voice-coil woofer; oversized 4-layer voice coils, high-energy 73.6-oz. double-stacked magnets, and vented pole yoke increase overall power handling and SPL output with no sacrifice in sound quality
  • Can be mounted in sealed or ported enclosure
  • Mounting depth: 6-1/8 in.
  • Cutout dimensions: 11-1/8 in.
  • Includes trim ring, mounting screws, adhesive-backed foam gasket, manual, and warranty information
  • Each

Petra SKU: PIOTSD10LB
Part No.: 394638
Vendor SKU: TS-D10LB
Retail Price: $340.00
  • 1,300-watt maximum, 350-watt RMS power output; 2-ohm impedance
  • Designed to boost low end of a vehicle's audio system
  • 10-in. D series subwoofer is preloaded into shallow-mount, sealed enclosure to increase installation versatility; mount freely in cabin or under seats; reposition to have subwoofer firing rear, front, or upwards for optimal bass tuning
  • Frequency response: 20 Hz to 3.4 kHz; sensitivity: 76 dB
  • Enclosure is fully carpeted for a nonslip, durable, and scratch-resistant surface; speaker grille is fully covered in steel mesh
  • Cone made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass
  • Butyl rubber surround keeps cone moving in linear direction, seals cone to basket, and quickly dampens cone vibration once signal has changed or stopped for less distortion and superior frequency response
  • Single-voice-coil woofer with copper voice coil wire, glass imide voice coil bobbin, and 43.4-oz. ferrite magnet
  • Includes mounting brackets, screws, manual, and warranty information
  • Each

Petra SKU: PIOTSD10D4
Part No.: 394640
Vendor SKU: TS-D10D4
Retail Price: $240.00
  • 1,500-watt maximum, 500-watt RMS power output; 4-ohm impedance
  • Designed to boost low end of a vehicle's audio system
  • Frequency response: 20 Hz to 6.6 kHz; sensitivity: 76 dB
  • Cone made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass
  • Butyl rubber surround keeps cone moving in linear direction, seals cone to basket, and quickly dampens cone vibration once signal has changed or stopped for less distortion and superior frequency response
  • 10-in. dual-voice-coil woofer; oversized 4-layer voice coils, high-energy 57.8-oz. double-stacked magnets, and vented pole yoke increase overall power handling and SPL output with no sacrifice in sound quality
  • Can be mounted in sealed or ported enclosure
  • Mounting depth: 5.5 in.
  • Cutout dimensions: 9 in.
  • Includes trim ring, mounting screws, adhesive-backed foam gasket, manual, and warranty information
  • Each

Petra SKU: PIOTSD69C
Part No.: 394646
Vendor SKU: TS-D69C
Retail Price: $260.00
  • System includes:
  • Two 6-in. x 9-in. woofers
  • Two 1-in. swivel-type tweeters with attached 4-in. speaker leads terminated with quick-connects
  • 2 flush-mount tweeter housings and 2 factory tweeter mount brackets
  • 2 lengths of speaker wire and screws
  • 330-watt maximum, 110-watt RMS power output; 4 ohms impedance
  • Component system expands installation flexibility while providing broad and balanced frequency response with a wide sound stage and amazing fidelity; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 33 Hz to 49 kHz; sensitivity: 86 dB; crossover frequency: 3.5 kHz
  • 6-in. x 9-in. cones made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass; butyl rubber surrounds, ferrite magnets, and PET center caps
  • 1-in. (26-mm) swivel-type polyester soft dome tweeters with neodymium magnets are contoured from lightweight, resin-impregnated fibers of coated polyester fabric; they deliver extended high-frequency performance and are very resistant to harsh environmental conditions, resulting in extremely low distortion levels and smooth, natural sound
  • Tweeters are extremely compact and feature unique swivel mount for precise aiming; included tri-position mounting kit enables flush mounting, surface mounting, or bracket mounting; tweeters can be concealed behind original equipment tweeter grille in vehicle's dash or door
  • Includes manual and warranty; does not include woofer grilles

Petra SKU: PIOTSD69F
Part No.: 394645
Vendor SKU: TS-D69F
Retail Price: $240.00
  • 330-watt maximum, 110-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 33 Hz to 42 kHz; sensitivity: 87 dB; crossover frequency: 3.5 kHz
  • 6-in. x 9-in. cones made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass; butyl rubber surrounds
  • Universal woofer basket design expands installation flexibility for maximum bass and sound quality
  • Swivel-type 1-in. (26-mm) polyester soft dome tweeters with neodymium magnets are contoured from lightweight, resin-impregnated fibers of coated polyester fabric; they deliver extended high-frequency performance and are very resistant to harsh environmental conditions, resulting in extremely low distortion levels and smooth, natural sound
  • Includes grilles, grille frames, gaskets, screws, warranty, and instructions
  • Pair

Petra SKU: PIOTSH150RA
Part No.: 394616
Vendor SKU: TS-H150-RA
Retail Price: $260.00
  • 180-watt maximum, 50-watt RMS power output; 6 ohms impedance
  • Designed to replace existing, older OEM tweeters to enhance audio system on Toyota RAV4's manufactured from December 2018 through 2023; not compatible with JBL sound systems
  • Frequency response: 1.3 kHz to 64 kHz; sensitivity: 90 dB
  • 1-1/8-in. aluminum hard dome tweeters with neodymium magnets are specifically designed to match acoustics of RAV4 vehicle's cabin so you can get enjoy superior sound quality
  • HSDOM (Harmonized Synthetic Diaphragm Optimum Method) technology uses computer-aided engineering to optimize sound reproduction across wider range of frequencies, resulting in smoother high-frequency experience with clear and powerful vocals
  • High-quality, scratch-resistant design complements your vehicle's interior
  • Seamless plug and play installation in factory speaker position on dashboard without compromising speaker function of "e-Call" emergency call system
  • Includes nonwoven tape, direct OEM connect harnesses, integrated crossover network, and warranty
  • Pair

Petra SKU: PIOTSMR1600
Part No.: 394617
Vendor SKU: TS-MR1600
Retail Price: $80.00
  • 100-watt maximum, 25-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM marine speakers or add new ones to watercraft or powersports vehicles
  • Frequency response: 30 Hz to 20 kHz; sensitivity: 90 dB
  • Injection-molded polypropylene (IMPP) cones produce outstanding mid-bass response and resist the effects of salt water, humidity, and extreme heat
  • Elastomer surrounds resist color fading or running, extending speaker longevity
  • AES (Acrylonitrile-Elastomer Styrene) glass-fiber-reinforced basket/magnet covers protect magnetic circuit that can affect the performance of the speaker
  • Pure White AES grilles resist fading and yellowing caused by direct sunlight and heat
  • Gold tinsel wire and gold-plated wire terminals for better current transfer
  • Cutout dimensions: 5 in.
  • Mounting depth: 2.25 in.
  • Includes 2 grilles, stainless steel screws and speed clips, warranty information, and template and specs on box
  • Pair

Petra SKU: PIOTSD65C
Part No.: 394647
Vendor SKU: TS-D65C
Retail Price: $250.00
  • System includes:
  • Two 6.5 in. woofers
  • Two 1-in. tweeters with attached 4-in. speaker leads terminated with quick-connects
  • 2 woofer grilles
  • 2 flush-mount tweeter housings and 2 factory tweeter mount brackets
  • 2 lengths of speaker wire and screws
  • 270-watt maximum, 90-watt RMS power output; 4 ohms impedance
  • Component system expands installation flexibility while providing broad and balanced frequency response with a wide sound stage and amazing fidelity; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 32 Hz to 49 kHz; sensitivity: 84 dB; crossover frequency: 3.5 kHz
  • 6.5-in. cones made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass; butyl rubber surrounds and PET center caps
  • 1-in. (26 mm) polyester soft dome tweeters are contoured from lightweight, resin-impregnated fibers of coated polyester fabric; they deliver extended high-frequency performance and are very resistant to harsh environmental conditions, resulting in extremely low distortion levels and smooth, natural sound
  • Tweeters are extremely compact and feature unique swivel mount for precise aiming; included tri-position mounting kit enables flush mounting, surface mounting, or bracket mounting; tweeters can be concealed behind original equipment tweeter grille in vehicle's dash or door
  • Includes manual and warranty

Petra SKU: PIOTSD65F
Part No.: 394648
Vendor SKU: TS-D65F
Retail Price: $210.00
  • 270-watt maximum, 90-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system
  • Frequency response: 32 Hz to 49 kHz; sensitivity: 85 dB; crossover frequency: 3.9 kHz
  • 6.5-in. cones made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass; butyl rubber surrounds
  • Universal woofer basket design expands installation flexibility for maximum bass and sound quality
  • Swivel-type 1-in. (26-mm) polyester soft dome tweeters with neodymium magnets are contoured from lightweight, resin-impregnated fibers of coated polyester fabric; they deliver extended high-frequency performance and are very resistant to harsh environmental conditions, resulting in extremely low distortion levels and smooth, natural sound
  • Includes screws, warranty, and instructions; does not include grilles
  • Pair

Petra SKU: PIOTSMR1640
Part No.: 394619
Vendor SKU: TS-MR1640
Retail Price: $130.00
  • 160-watt maximum, 30-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM marine speakers or add new ones to watercraft or powersports vehicles
  • Frequency response: 30 Hz to 30 kHz; sensitivity: 91 dB
  • Injection-molded polypropylene (IMPP) cones produce outstanding mid-bass response and resist the effects of salt water, humidity, and extreme heat
  • Elastomer surrounds resist color fading or running, extending speaker longevity
  • AES (Acrylonitrile-Elastomer Styrene) glass-fiber-reinforced basket/magnet covers protect magnetic circuit that can affect the performance of the speaker
  • 1.125-in. polyether imide dome tweeters with magnetic fluid deliver rich, smooth highs
  • Pure White AES grilles resist fading and yellowing caused by direct sunlight and heat
  • Gold tinsel wire and gold-plated wire terminals for better current transfer
  • Cutout dimensions: 5 in.
  • Mounting depth: 2.25 in.
  • Includes 2 grilles, stainless steel screws and speed clips, and warranty information
  • Pair

Petra SKU: PIOTSWX140DA
Part No.: 394650
Vendor SKU: TS-WX140DA
Retail Price: $340.00
  • Rectangular subwoofer driver with built-in 170-watt-max (50-watt-RMS) Class D amplifier
  • Designed to add extra bass in space-challenged vehicles; compact enclosure for installation flexibility such as under seats, behind seats, or inside small storage compartments; also incorporates recessed section for connectors, controls, and multi-angle mounting brackets
  • High-efficiency amp has low current draw of 4.3 amps max, so won't affect EV mileage
  • Frequency response depends on bass settings; deep: 20 Hz to 200 Hz; dynamic: 40 Hz to 160 Hz; natural: 40 Hz to 200 Hz
  • Aluminum driver cone material, cellulose fiber cone material, urethane surround, iron plate press basket material, and 17.2-oz. weight of ferrite magnet
  • Single-voice coil with copper wire and glass imide coil bobbin; aramid damper
  • Wired digital bass control allows you to match subwoofer output to your listening preference and vehicle interior with gain, LPF, phase, and bass modes
  • Fully covered steel mesh speaker grille
  • Dimensions: 11 in. W x 7.875 in. D x 2.75 in. H
  • Includes wired remote multiple settings and attached 16.2-ft. cable, 10.5-in. RCA input harness, power harness with 16.5-ft. power and remote turn-on leads and 6-ft. ground wire, 10-amp ATO fuse in fuse holder (installed on power wire), mounting feet, cable clamp, screws, adhesive-backed hook-and-loop pad, instruction manual, and warranty sheet

Petra SKU: PIOTSD68F
Part No.: 394644
Vendor SKU: TS-D68F
Retail Price: $220.00
  • 240-watt maximum, 80-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 32 Hz to 42 kHz; sensitivity: 87 dB; crossover frequency: 4 kHz
  • 6-in. x 8-in. cones made from aramid fiber-interlaced injection-molded polypropylene for superior strength and low mass with high rigidity to produce deep, powerful, and undistorted bass; butyl rubber surrounds
  • Universal woofer basket design expands installation flexibility for maximum bass and sound quality
  • Swivel-type 1-in. (26-mm) polyester soft dome tweeters with neodymium magnets are contoured from lightweight, resin-impregnated fibers of coated polyester fabric; they deliver extended high-frequency performance and are very resistant to harsh environmental conditions, resulting in extremely low distortion levels and smooth, natural sound
  • Includes screws, warranty, and instructions; does not include grilles
  • Pair

Petra SKU: PIOTSMR2040
Part No.: 394618
Vendor SKU: TS-MR2040
Retail Price: $200.00
  • 200-watt maximum, 40-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM marine speakers or add new ones to watercraft or powersports vehicles
  • Frequency response: 25 Hz to 30 kHz; sensitivity: 92 dB
  • Injection-molded polypropylene (IMPP) cones produce outstanding mid-bass response and resist the effects of salt water, humidity, and extreme heat
  • Elastomer surrounds resist color fading or running, extending speaker longevity
  • AES (Acrylonitrile-Elastomer Styrene) glass-fiber-reinforced basket/magnet covers protect magnetic circuit that can affect the performance of the speaker
  • 0.75-in. hard dome tweeters deliver stunning high frequencies while also protecting tweeter from moisture
  • Pure White AES grilles resist fading and yellowing caused by direct sunlight and heat
  • Gold tinsel wire and gold-plated wire terminals for better current transfer
  • Cutout dimensions: 7.25 in.
  • Mounting depth: 3 in.
  • Includes 2 fixed grilles, stainless steel screws and speed clips, warranty information, and specifications and template on box
  • Pair

Petra SKU: PIOTSB351PRO
Part No.: 395556
Vendor SKU: TS-B351PRO
Retail Price: $90.00
  • 300 watts max power handling; 150 watts nominal
  • Frequency response: 3 kHz to 22 kHz; sensitivity: 100 dB; nominal impedance: 4 ohms
  • Aftermarket 3.5-in. tweeter pair designed for high sensitivity and high power handling; commonly used by street enthusiasts
  • Titanium diaphragms and high-quality aluminum die-cast baskets to maintain better accuracy under high power and for better heat dissipation
  • Optimized horn throats for ultra-high efficiency and flat frequency response
  • Assemblies of power motor and large magnet produce high sensitivity and high power handling
  • Aluminum bullets for optimal sound tuning and effective heat radiation
  • Field serviceable-no glue required; repair kit sold separately
  • Includes pre-soldered crossover network capacitors, mounting screws, manual, and 1-year warranty card
  • Pair

Petra SKU: PIOTSB401PRO
Part No.: 395554
Vendor SKU: TS-B401PRO
Retail Price: $100.00
  • 600 watts max power handling; 300 watts nominal
  • Frequency response: 2.5 kHz to 22 kHz; sensitivity: 106 dB; nominal impedance: 4 ohms
  • Aftermarket 4-in. tweeter designed for high sensitivity and high power handling; commonly used by street enthusiasts
  • Titanium diaphragm and high-quality aluminum die-cast basket to maintain better accuracy under high power and for better heat dissipation
  • Optimized horn throat for ultra-high efficiency and flat frequency response
  • Large magnet and assembly of power motor produce high sensitivity and high power handling
  • Aluminum bullet for optimal sound tuning and effective heat radiation
  • Field serviceable-no glue required; repair kit sold separately
  • Includes crossover network capacitor, mounting screws, manual, and 1-year warranty card
  • Each

Petra SKU: PIOTSM651PRO
Part No.: 395551
Vendor SKU: TS-M651PRO
Retail Price: $210.00
  • 500 watts max power handling; 120 watts nominal
  • Frequency response: 50 Hz to 18 kHz; sensitivity: 94 dB; nominal impedance: 4 ohms
  • Aftermarket 6.5-in. mid-bass driver pair designed for high sensitivity and high power handling; commonly used by street enthusiasts
  • Lightweight and rigid pulp cones for clean and loud bass notes with a smooth mid-bass transition to upper-range frequencies; corrugated cloth surrounds
  • Interlaced tinsel wire improves durability by reducing physical stress under high excursion
  • Assemblies of power motor and large magnet produce high sensitivity and high power handling
  • Red aluminum bullets for optimal sound tuning and effective heat radiation
  • Aluminum braces strengthen tapered neck for accurate bass and reduces distortion by working similar to a shorting ring
  • Heavy-gauge stamped steel baskets with reinforcement to maintain better precision under high power
  • Includes grilles, mounting screws, and 1-year warranty card
  • Pair

Petra SKU: PIOTSM801PRO
Part No.: 395550
Vendor SKU: TS-M801PRO
Retail Price: $240.00
  • 700 watts max power handling; 200 watts nominal
  • Frequency response: 40 Hz to 15 kHz; sensitivity: 96 dB; nominal impedance: 4 ohms
  • Aftermarket 8-in. mid-bass driver pair designed for high sensitivity and high power handling; commonly used by street enthusiasts
  • Lightweight and rigid pulp cones for clean and loud bass notes with a smooth mid-bass transition to upper-range frequencies; corrugated cloth surrounds
  • Interlaced tinsel wire improves durability by reducing physical stress under high excursion
  • Assemblies of power motor and large magnet produce high sensitivity and high power handling
  • Red aluminum bullets for optimal sound tuning and effective heat radiation
  • Aluminum braces strengthen tapered neck for accurate bass and reduces distortion by working similar to a shorting ring
  • Heavy-gauge stamped steel baskets with reinforcement to maintain better precision under high power
  • Includes grilles, mounting screws, and 1-year warranty card
  • Pair

Petra SKU: PIOTSW3020PRO
Part No.: 395552
Vendor SKU: TS-W3020PRO
Retail Price: $405.00
  • 3,500 watts max power handling; 1,800 watts nominal
  • Frequency response: 20 Hz to 20 Hz; sensitivity: 88 dB; dual 2-ohm nominal impedance
  • Aftermarket 12-in. component subwoofer designed for high sensitivity and high power handling; commonly used by street enthusiasts
  • Super-wide urethane surround and combined seam achieve high durability with a high-power input
  • Interlaced tinsel wire improves durability by reducing physical stress under high excursion
  • Assembly of power motor and large magnet produces high sensitivity and high power handling
  • Internal cover draws heat away from voice coil and improves high power handling
  • Red, high-quality die-cast aluminum baskets maintain better accuracy under high power and for better heat dissipation
  • 4-layer copper long voice coil with aluminum bobbin; powerful motor to keep the job going under high power and high heat stress situations
  • Includes mounting screws, manual, and 1-year warranty card
  • Each

Petra SKU: PIONDBC010
Part No.: 396403
Vendor SKU: ND-BC010
Retail Price: $120.00
  • Rearview/front-view installation flexibility
  • Wide-angle lens with 155° horizontal/125° vertical field of view; f/1.5 aperture
  • 470,000-pixel resolution with 960 lines of horizontal definition
  • Compatible with Pioneer A/V and navigation in-dash receivers with a rearview camera input
  • 1/4-in. color CMOS sensor for improved imagery daytime and night
  • Minimum lighting intensity: 0.1 lux to 0.01 lux
  • Dimensions: 7/8 in. x 7/8 in. x 7/8 in.
  • Includes bracket with attached 9-ft. power/video cable; 23-ft. power/video cable, hex key, and owner's manual

Petra SKU: PIOTSA1081F
Part No.: 396415
Vendor SKU: TS-A1081F
Retail Price: $110.00
  • 230-watt maximum, 50-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 82 Hz to 40 kHz; sensitivity: 90 dB
  • 4-in. cones made from carbon and mica-reinforced injection-molded polypropylene; rubber-coated surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 0.984-in. (25-mm) PEI hard dome tweeters with neodymium magnets
  • Iron plate press woofer basket; 4-hole and 2-hole custom fit for flexible mounting applications
  • Mounting depth: 1-5/8 in.
  • Includes two 12-in. lengths of speaker wire and 1-year warranty sheet
  • Pair

Petra SKU: PIOTSA1301C
Part No.: 396408
Vendor SKU: TS-A1301C
Retail Price: $170.00
  • 300-watt maximum, 50-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 42 Hz to 58 kHz; sensitivity: 90 dB; crossover frequency: 3.35 kHz
  • 5-1/4-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • Iron plate press woofer basket
  • 0.787-in. (20-mm) component PEI hard dome tweeters with neodymium magnets
  • Mounting depth: 2-1/8 in.
  • Includes 2 woofers, 2 tweeters (with attached 10-in. speaker leads terminated with quick-connects), 2 lengths of speaker wire (each has quick slides to connect to the woofer-a 40-in. tweeter output leg with integrated crossover and an 11-in. input leg), 2 tweeter angled-surface mount housings, 2 tweeter flush-mount rings, 2 tweeter factory mount brackets, screws, speed clips, adhesive-backed foam discs, 1-year warranty sheet, and Installation template and specs on box
  • Pair

Petra SKU: PIOTSA1371F
Part No.: 396409
Vendor SKU: TS-A1371F
Retail Price: $110.00
  • 300-watt maximum, 50-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 44 Hz to 52 kHz; sensitivity: 89 dB
  • 5-1/4-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 1-5/8-in. cellulose fiber cone midranges
  • 0.433-in. (11-mm) PET hard dome tweeters with neodymium magnets
  • Iron plate press woofer basket
  • Mounting depth: 2-1/8 in.
  • Includes 2 grilles, two 12-in. lengths of speaker wire (female quick slides on 1 end and bare wire on the other), screws, warranty information, and specs/template on box
  • Pair

Petra SKU: PIOTSA1601C
Part No.: 396410
Vendor SKU: TS-A1601C
Retail Price: $180.00
  • 350-watt maximum, 80-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 33 Hz to 58 kHz; sensitivity: 90 dB; crossover frequency: 2.7 kHz
  • 6-1/2-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • Iron plate press woofer basket
  • 0.787-in. (20-mm) component PEI hard dome tweeters with neodymium magnets
  • Mounting depth: 2-3/8 in.
  • Includes 2 woofers, 2 tweeters (with attached 10-in. speaker leads terminated with quick-connects), 2 lengths of speaker wire (each has quick slides to connect to the woofer-a 40-in. tweeter output leg with integrated crossover and an 11-in. input leg), 2 tweeter angled-surface mount housings, 2 tweeter flush-mount rings, 2 tweeter factory mount brackets, screws, speed clips, adhesive-backed foam discs, 1-year warranty sheet, and Installation template and specs on box
  • Pair

Petra SKU: PIOTSA1681F
Part No.: 396413
Vendor SKU: TS-A1681F
Retail Price: $130.00
  • 350-watt maximum, 80-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 35 Hz to 29 kHz; sensitivity: 91 dB
  • 6-1/2-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 1-5/8-in. polyetherimide cone midranges
  • 0.433-in. (11-mm) PET hard dome tweeters and super tweeters
  • Iron plate press woofer basket
  • Mounting depth: 2-3/8 in.
  • Includes 2 grilles, 2 multi-application mounting adapters, two 12-in. lengths of speaker wire, mounting screws, and 1-year warranty information
  • Pair

Petra SKU: PIOTSA301TW
Part No.: 396417
Vendor SKU: TS-A301TW
Retail Price: $65.00
  • 450 watts max power handling; 100 watts nominal
  • Frequency response: 1.8 kHz to 58 kHz; sensitivity: 90 dB; nominal impedance: 4 ohms
  • Aftermarket 3/4-in. tweeter pair designed to augment or replace OEM or aftermarket speakers; multi-fit installation adapters optimize fitment in applicable original equipment (OE) speaker locations
  • 0.787-in. (20-mm) component PEI hard dome tweeters with neodymium magents
  • Includes attached 10-in. speaker leads terminated with quick-connects, two 40-in. lengths of speaker wire with in-line crossovers (each has quick slides to connect to the tweeter on one end and bare wire on the other), 2 angled surface-mount housings, 2 flush-mount rings, 2 factory-mount brackets, six 1/2-in. screws, 2 speed clips, 2 adhesive-backed foam discs, 1-year warranty, and specs on box
  • Pair

Petra SKU: PIOTSA4671F
Part No.: 396404
Vendor SKU: TS-A4671F
Retail Price: $110.00
  • 210-watt maximum, 30-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 34 Hz to 49 kHz; sensitivity: 88 dB
  • 4-in. x 6-in. cones made from carbon and mica-reinforced injection-molded polypropylene; rubber-coated cloth surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 1-5/8-in. cellulose fiber cone midranges
  • 0.433-in. (11-mm) PET hard dome tweeters and super tweeters
  • Iron plate press woofer basket
  • Mounting depth: 1-5/8 in.
  • Includes 2 plastic metric-to-standard adapter brackets, 2 bottom-mount brackets, two 12-in. lengths of speaker wire, 8 mounting screws, nuts, and washers, and 1-year warranty sheet
  • Pair

Petra SKU: PIOTSA6901C
Part No.: 396406
Vendor SKU: TS-A6901C
Retail Price: $180.00
  • 450-watt maximum, 100-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 29 Hz to 58 kHz; sensitivity: 92 dB; crossover frequency: 3.8 kHz
  • 6-in. x 9-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • Iron plate press woofer basket; universal design expands installation
  • 0.787-in. (20-mm) component PEI hard dome tweeters with neodymium magnets
  • Mounting depth: 2-7/8 in.
  • Includes 2 woofers, 2 tweeters (with attached 10-in. speaker leads terminated with quick-connects), 2 lengths of speaker wire (each has quick slides to connect to the woofer-a 40-in. tweeter output leg with integrated crossover and an 11-in. input leg), 2 tweeter angled-surface mount housings, 2 tweeter flush-mount rings, 2 tweeter factory-mount brackets, screws, speed clips, adhesive-backed foam discs, 1-year warranty sheet, and Installation template and specs on box
  • Pair

Petra SKU: PIOTSA6971F
Part No.: 396405
Vendor SKU: TS-A6971F
Retail Price: $110.00
  • 600-watt maximum, 100-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 29 Hz to 23 kHz; sensitivity: 92 dB
  • 6-in. x 9-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 2-1/4-in. PEI film cone midranges
  • 0.708 (18-mm) PET dome tweeter and 0.433-in. (11-mm) PET dome super tweeters
  • Iron plate press woofer basket
  • Mounting depth: 2-7/8 in.
  • Includes 2 grilles, 2 multi-application mounting brackets, two 12-in. lengths of speaker wire, 16 various mounting screws, 1-year warranty sheet, and specs and template on box
  • Pair

Petra SKU: PIOTSA1671F
Part No.: 396412
Vendor SKU: TS-A1671F
Retail Price: $110.00
  • 320-watt maximum, 70-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 37 Hz to 31 kHz; sensitivity: 91 dB
  • 6-1/2-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 1-5/8-in. cellulose fiber cone midranges
  • 0.433-in. (11-mm) PET hard dome tweeters
  • Iron plate press woofer basket
  • Mounting depth: 1-7/8 in.
  • Includes 2 grilles, 2 multi-application mounting adapters, two 12-in. lengths of speaker wire, mounting screws, and 1-year warranty information
  • Pair

Petra SKU: PIOTSA6881F
Part No.: 396407
Vendor SKU: TS-A6881F
Retail Price: $110.00
  • 350-watt maximum, 80-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 30 Hz to 32 kHz; sensitivity: 80 dB
  • 6-in. x 8-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 1-5/8-in. (42-mm) cellulose fiber cone midranges
  • 0.433-in. (11-mm) PET dome tweeters and super tweeters
  • Iron plate press woofer basket
  • Mounting depth: 2-1/2 in.
  • Includes 2 bottom-mount brackets, two 12-in. lengths of speaker wire, 8 mounting screws, and 1-year warranty sheet
  • Pair

Petra SKU: PIOTSA6961F
Part No.: 396411
Vendor SKU: TS-A6961F
Retail Price: $110.00
  • 450-watt maximum, 90-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 29 Hz to 28 kHz; sensitivity: 92 dB
  • 6-in. x 9-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 2-1/4-in. cellulose fiber midranges
  • 0.708 (18-mm) PET dome tweeter and 0.433-in. (11-mm) PET dome super tweeters
  • Iron plate press woofer basket
  • Mounting depth: 2-7/8 in.
  • Includes 2 grilles, 2 multi-application mounting brackets, two 12-in. lengths of speaker wire, 16 various mounting screws, and 1-year warranty sheet
  • Pair

Petra SKU: PIOTSA6991F
Part No.: 396414
Vendor SKU: TS-A6991F
Retail Price: $150.00
  • 700-watt maximum, 120-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 29 Hz to 33 kHz; sensitivity: 92 dB
  • 6-in. x 9-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 2-1/4-in. (57-mm) PEI film cone midranges
  • 0.708 (18-mm) PET dome tweeter and 0.433-in. (11-mm) and 0.354-in. (9-mm) PET dome super tweeters
  • Iron plate press woofer basket
  • Mounting depth: 3-3/8 in.
  • Includes 2 grilles, 2 bottom-mounting brackets, two 12-in. lengths of speaker wire (female quick slides on 1 end and bare wire on the other), 8 screws, 1-year warranty sheet, and specs and template on box
  • Pair

Petra SKU: PIOTSA6991FH
Part No.: 396416
Vendor SKU: TS-A6991FH
Retail Price: $180.00
  • 750-watt maximum, 150-watt RMS power output; 4 ohms impedance
  • Designed to replace existing, older OEM speakers or add new ones to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 29 Hz to 31 kHz; sensitivity: 93 dB
  • 6-in. x 9-in. cones made from carbon and mica-reinforced injection-molded polypropylene; elastic polymer surrounds; ferrite magnets
  • Glass imide voice coil bobbin; copper voice coil wire
  • 2-1/4-in. (57-mm) PEI film cone midranges
  • 0.708 (18-mm) PET dome tweeter and 0.433-in. (11-mm) and 0.354-in. (9-mm) PET dome super tweeters
  • Iron plate press woofer basket
  • Mounting depth: 3-3/8 in.
  • Includes 2 grilles, 2 bottom-mounting brackets, two 12-in. lengths of speaker wire (female quick slides on 1 end and bare wire on the other), 8 screws, 1-year warranty sheet, and specs and template on box
  • Pair

Petra SKU: PIOTST15
Part No.: 135127
Vendor SKU: TS-T15
Retail Price: $75.00
  • 3/4 in. polyester fiber soft-dome tweeters with neodymium magnet and magnet fluid
  • 120 watts max (40 watts nominal)
  • -6 dB/oct capacitors for tweeter protection
  • Flush or surface mount
  • Frequency response: 25 kHz-30 kHz
  • Sensitivity: 90 dB at 1 watt/1 meter
  • Impedance: 4 ohms
  • Pair

Petra SKU: PIOTSA120D4
Part No.: 396608
Vendor SKU: TS-A120D4
Retail Price: $145.00
  • 1,500-watt maximum, 500-watt RMS power output; 4 ohm dual voice coil
  • Designed to replace existing, older OEM subwoofer or add new one to enhance a vehicle's audio system; compatible with Pioneer CarSoundFit in-car sound simulator app
  • Frequency response: 20 Hz to 2.3 kHz; sensitivity: 77 dB
  • Cone made from glass fiber and mica-interlaced injection-molded polypropylene composite; butyl rubber surround and polycotton/cotton dual spider for strength and linearity during high excursion
  • Kapton voice coil bobbin; copper voice coil wire
  • 60-oz. double-stacked ferrite magnet and vented pole yoke for increased power handline
  • Stamped metal woofer basket
  • Push-type wire terminals
  • Mounting depth: 5-3/4 in.
  • Includes trim ring, 1-1/8-in. screws, adhesive-backed foam gasket, manual, and warranty information
  • Each

Petra SKU: PIOMVHS622BS
Part No.: 394627
Vendor SKU: MVH-S622BS
Retail Price: $170.00
  • 50 watts x 4 channels max power output with six 4-volt preamp outputs for speaker and subwoofer hookup
  • Designed to replace existing, older double-DIN head units in order to add updated features such as Bluetooth and smartphone compatibility
  • 2-line VA LCD display; LED backlight; dual-zone color customization with 210,000 color choices; 3 rotary knobs activate/trigger dynamic bass enhancer, read paired phone's messages aloud, and launch navigation app
  • Smart Sync app compatible; expands unit's features to include Alexa and user interface-unit's rotary knob will trigger system to read messages out loud and bass boost button activates dynamic bass enhancer effect
  • Bluetooth audio streaming and hands-free calling to keep hands on the wheel and eyes on the road for safety; dual phone connectivity plus 5-phone registration
  • Android and iPhone connectivity; compatible with Spotify, Pandora, and Siri Eyes Free
  • Audio file playback via USB: AAC, FLAC, WAV, MP3, WMA
  • USB input for media or charging, USB direct control for iPhone 5s and newer, and aux input
  • MIXTRAX takes music from an iPhone or USB device and plays it back with added transitions and effects
  • AM/FM tuner; 18 FM and 6 AM station presets; SiriusXM ready (tuner sold separately)
  • 13-band customizable graphic equalizer (expands to 31 with Smart Sync app), manual Time Alignment, Advanced Sound Retriever, and listening position selector
  • Steering wheel control ready (adapter sold separately)
  • Includes wiring harness, microphone with bracket, installation hardware, quick-start guide, and 1-year warranty sheet