PLP banner

Per page:  

Petra SKU: PACSNI35
Part No.: 133467
Vendor SKU: SNI-35
Retail Price: $25.00
  • For use when adding an amp to a factory radio to convert radio's speaker level output to the lower level RCA input
  • For use with radios with 2 watts RMS to 40 watts RMS of output per channel
  • Works with most factory-installed radios
  • 50 watts maximum input per channel; both output channels are adjustable
  • Linear 20 to 20 kHz output based on the input signal; rolls off below 20 Hz for subsonic reduction
  • Transformer isolated for optimal sound and performance
  • Maintains correct phasing

Petra SKU: PACTR4
Part No.: 133469
Vendor SKU: TR-4
Retail Price: $22.00
  • For use in any aftermarket amp installation where a remote turn-on is needed
  • For adding a subwoofer and amp to a factory system
  • Senses voltages as low as 0.8 volts and provides a 12-volt output with a 1-second delay that eliminates turn-on pops
  • Uses a speaker lead or +5 remote wires

Petra SKU: PACSNI50A
Part No.: 186424
Vendor SKU: SNI-50A
Retail Price: $29.00
  • 50 watt max input per channel
  • Frequency response: 20 Hz to 20 kHz
  • Transformer isolated for optimal sound and performance
  • Maintains correct phasing
  • Works with most factory-installed radios
  • Detachable wiring harness
  • Integrated wire-tie mount

Petra SKU: DBDHLC5R
Part No.: 212541
Vendor SKU: HLC5R
Retail Price: $29.95
  • High/low converter
  • Remote trigger output

Petra SKU: MECIBLOC02
Part No.: 242496
Vendor SKU: IBLOC02
Retail Price: $8.00
  • 2-channel adjustable-level line out converter
  • Handles up to 80 watts power input
  • Fully adjustable dual-output level controls
  • Transformer design isolates ground loops
  • Wired input to 2 RCA female outputs

Petra SKU: DBDHLC3
Part No.: 159978
Vendor SKU: HLC3
Retail Price: $29.95
  • Adjustable output level control
  • Small, convenient size; ideal for tight installations

Petra SKU: MECCAXCSD6V
Part No.: 388759
Vendor SKU: AXCSD-6V
Retail Price: $31.00
  • Converts 12-volt DC to 6-volt DC
  • Provides proper voltage for 6-volt factory backup camera (sold separately); universal application
  • Black connects to chassis ground
  • Blue/White cable is reverse trigger; accessory power can also be used if the radio has the option to monitor camera while in motion
  • Blue/Red is camera power