Pioneer® TS-WX010A Compact 160-Watt-Max Powered Down-Firing Subwoofer with Built-in Class D Amp, Black
Petra SKU:
PIOTSWX010A
Part No.:
348209
Vendor SKU:
TS-WX010A
Retail Price:
$340.00
- 6-5/8 in. x 3-1/8 in. rectangular woofer
- 160 watts max, 50 watts nominal
- Compact, down-firing sub designed to fit in passenger footwell of today's vehicles including EVs and gasoline/electric hybrids
- Low weight, small size, and low power consumption
- Easy installation and can be mounted vertically or horizontally
- Low-mass, high-strength aluminum cone
- Urethane surround
- High-power magnetic circuit
- Down-firing sealed enclosure made of high-grade resin
- Built-in Class D amp
- Frequency range: 20 Hz to 200 Hz
- Sensitivity: 98 dB (when installed in foot space of car)
- Weight: less than 3.5 lbs.
- Accepts both RCA line level and speaker level inputs
- Dimensions: 9 in. W x 4-5/8 in. D x 2-3/4 in. H
- Must not be installed in the driver area or anywhere else that interferes with safe operation of the vehicle, air bags, controls, and indicators
- Includes mounting brackets, nuts, screws, wiring harness, 10-amp ATO fuse in holder (installed on power wire), cushion tape, installation manual, and warranty
Pioneer® TS-WX140DA 8-In. x 5.25-In. 170-Watt-Max-Power Compact Active Subwoofer with Wired Bass Remote
Petra SKU:
PIOTSWX140DA
Part No.:
394650
Vendor SKU:
TS-WX140DA
Retail Price:
$340.00
- Rectangular subwoofer driver with built-in 170-watt-max (50-watt-RMS) Class D amplifier
- Designed to add extra bass in space-challenged vehicles; compact enclosure for installation flexibility such as under seats, behind seats, or inside small storage compartments; also incorporates recessed section for connectors, controls, and multi-angle mounting brackets
- High-efficiency amp has low current draw of 4.3 amps max, so won't affect EV mileage
- Frequency response depends on bass settings; deep: 20 Hz to 200 Hz; dynamic: 40 Hz to 160 Hz; natural: 40 Hz to 200 Hz
- Aluminum driver cone material, cellulose fiber cone material, urethane surround, iron plate press basket material, and 17.2-oz. weight of ferrite magnet
- Single-voice coil with copper wire and glass imide coil bobbin; aramid damper
- Wired digital bass control allows you to match subwoofer output to your listening preference and vehicle interior with gain, LPF, phase, and bass modes
- Fully covered steel mesh speaker grille
- Dimensions: 11 in. W x 7.875 in. D x 2.75 in. H
- Includes wired remote multiple settings and attached 16.2-ft. cable, 10.5-in. RCA input harness, power harness with 16.5-ft. power and remote turn-on leads and 6-ft. ground wire, 10-amp ATO fuse in fuse holder (installed on power wire), mounting feet, cable clamp, screws, adhesive-backed hook-and-loop pad, instruction manual, and warranty sheet