PLP banner

Per page:  

Petra SKU: PYLPLPW10D
Part No.: 222463
Vendor SKU: PLPW10D
Retail Price: $95.99
  • 1,000 watts max
  • 500 watts RMS
  • Dual 4-ohm voice coils
  • 50-oz. magnet
  • Black steel basket
  • Nonpressed paper cone
  • Specially treated foam surround
  • Spring-loaded push-down speaker terminals
  • Each

Petra SKU: PIOTSWX1010A
Part No.: 329801
Vendor SKU: TS-WX1010A
Retail Price: $290.00
  • 1,100 watts max, 300 watts nominal; built-in Class D amp
  • Frequency response: 20 Hz to 125 Hz
  • Sensitivity: 112 dB at 1W/1m
  • 10-in. woofer with cellulose fiber cone and urethane surround
  • Variable bass boost: 0 dB to 12 dB, 40 Hz to 100 Hz
  • Gain and frequency control at side panel
  • Carpeted, nonslip, durable, and scratch-resistant surface
  • Trapezoidal prism enclosure shape
  • Can be installed in multiple locations
  • Dimensions: 17-3/4 in. W x 13-1/4 in. H with depth of base ranging from 9-3/8 in. at bottom and 7-1/2 in. at top
  • Includes wired remote bass control knob, power/ground/remote wiring harness, and manual

Petra SKU: PIOTSA250D4
Part No.: 335443
Vendor SKU: TS-A250D4
Retail Price: $120.00
  • 1,300W max
  • 400W RMS
  • 10" glass-fiber & mica-interlaced Injection Molded Polypropylene (IMPP) cone construction
  • Butyl rubber surround & polycotton aramid fiber spider for strength & linearity during high excursion
  • Dual 4Ω voice coils
  • Oversized 56oz double-stacked magnet & vented pole yoke for increased power handling
  • Freq resp: 20Hz to 2kHz
  • Sensitivity: 74dB
  • Recommended enclosure size range: .5 cu ft-.8 cu ft
  • Mounting depth: 5.25"
  • Includes mounting screws & brackets
  • Each

Petra SKU: PIOTSA25S4
Part No.: 339298
Vendor SKU: TS-A25S4
Retail Price: $95.00
  • Dynamic tornado cone design for more stability during excursion
  • Rubber surround
  • 8-gauge push terminals for easy connectivity
  • 10 in.
  • 1,200 watts max
  • 350 watts nominal

Petra SKU: PIOTSA2500LS4
Part No.: 341268
Vendor SKU: TS-A2500LS4
Retail Price: $210.00
  • 10 in. subwoofer
  • 1,200 watts max, 300 watts RMS
  • Frequency response: 20 Hz to 900 Hz
  • Unique design with just 3-3/8 in. mounting depth
  • Small enclosure use (.35 to .7 cu. ft.)
  • 4 ohm impedance
  • Single voice coil
  • Glass fiber and mica reinforced IMPP cone
  • Rubber surround
  • Double reinforced spider
  • 8 gauge push terminals
  • Cutout dimensions: 9 in. diameter

Petra SKU: DBDWDX10G14
Part No.: 344380
Vendor SKU: WDX10G1.4
Retail Price: $299.98
  • 2,000 watts max
  • 1,000 watts nominal output power
  • 3 in. high-temperature voice coils
  • Nonpressed paper cone
  • Double-stitched foam surround
  • Dual poly-cotton dampeners
  • Die-cast aluminum vented basket
  • Rubber gasket trim ring
  • Large-gauge compression terminals
  • Protective magnet cover
  • Frame diameter: 10.86 in.
  • Woofer cutout diameter: 9.15 in.
  • Mounting depth: 6.15 in.
  • Includes owner's manual/warranty

Petra SKU: DBDSPF10D4
Part No.: 348830
Vendor SKU: SPF10D4
Retail Price: $269.95
  • 1,000 watts max
  • 300 watts nominal
  • Frequency response: 20 Hz to 300 Hz
  • SPL: 82.9 dB
  • 2.5 in., 4-layer dual-4-ohm voice coil with aluminum former
  • IMPP cone with foam surround
  • 40 oz. ferrite magnet
  • Ultra-thin, stamped-steel frame design
  • Blue zinc-finished top and bottom plates
  • Mixed C fiber spider
  • Heavy-gauge spring terminals
  • Mounting depth: 3.5 in.
  • Cutout diameter: 9.05 in.
  • Outside diameter: 10.43 in.
  • Each

Petra SKU: DBDWDX10G02
Part No.: 397101
Vendor SKU: WDX10G0.2
Retail Price: $269.98
  • 1,000-watt max power output, 500-watt power output; 2-ohm impedance; dual voice coils
  • Designed to add low-end frequencies to vehicle sound systems
  • 100-oz. magnet for deep, resonating bass
  • 2.5-in. (63.5-mm) high-temperature voice coil for crystal clear sound quality
  • Stamped cast-steel vented basket provides durability and optimal cooling, ensuring long-lasting performance
  • Reinforced paper cone withstands even the most intense bass frequencies
  • Double-stitched foam surround and dual poly-cotton dampeners enhance sound performance and minimize distortion, resulting in immersive and precise sound reproduction
  • Rubber gasket trim ring for snug reduces vibrations
  • Large gauge compression terminals for easy installation
  • Protective magnet cover for added protection and give a rugged yet stylish appearance

Petra SKU: DBDWDX10G04
Part No.: 397100
Vendor SKU: WDX10G0.4
Retail Price: $269.98
  • 1,000-watt max power output, 500-watt power output; 4-ohm impedance; dual voice coils
  • Designed to add low-end frequencies to vehicle sound systems
  • 100-oz. magnet for deep, resonating bass
  • 2.5-in. (63.5-mm) high-temperature voice coil for crystal clear sound quality
  • Stamped cast-steel vented basket provides durability and optimal cooling, ensuring long-lasting performance
  • Reinforced paper cone withstands even the most intense bass frequencies
  • Double-stitched foam surround and dual poly-cotton dampeners enhance sound performance and minimize distortion, resulting in immersive and precise sound reproduction
  • Rubber gasket trim ring for snug reduces vibrations
  • Large gauge compression terminals for easy installation
  • Protective magnet cover for added protection and give a rugged yet stylish appearance

Petra SKU: DBDWDX12G04
Part No.: 397102
Vendor SKU: WDX12G0.4
Retail Price: $299.98
  • 1,200-watt max power output, 600-watt power output; 4-ohm impedance; dual voice coils
  • Designed to add low-end frequencies to vehicle sound systems
  • 100-oz. magnet for deep, resonating bass
  • 2.5-in. (63.5-mm) high-temperature voice coil for crystal clear sound quality
  • Stamped cast steel vented basket provides durability and optimal cooling, ensuring long-lasting performance
  • Reinforced paper cone withstands even the most intense bass frequencies
  • Double-stitched foam surround and dual poly-cotton dampeners enhance sound performance and minimize distortion, resulting in immersive and precise sound reproduction
  • Rubber gasket trim ring for snug reduces vibrations
  • Large gauge compression terminals for easy installation
  • Protective magnet cover for added protection and give a rugged yet stylish appearance