PLP banner

Per page:  

Petra SKU: PACLC1
Part No.: 133459
Vendor SKU: LC-1
Retail Price: $27.00
  • Adds wired subwoofer level controls to any head unit
  • Enables volume balance in any part of an amplified system; fine-tunes volume of any RCA line-level signal
  • Compact housing means unit can be mounted, in dash, or under dash
  • Includes remote mounting bracket

Petra SKU: PYLPLA2200
Part No.: 160080
Vendor SKU: PLA2200
Retail Price: $98.99
  • Class AB
  • 1,400 watts max; 80 watts RMS x 2 at 4 ohms; 700 watts x 2 at 4Ω
  • MOSFET PWM power supply
  • Variable high/low electronic-crossover network
  • Variable input level and bass boost
  • Subsonic filter
  • Thermal, overload, and short circuit protection
  • Power and protection LED indicators
  • Low-level inputs
  • Dim: 1.42 in. H x 8.75 in. W x 10.63 in. D

Petra SKU: DBDNEOCAP5
Part No.: 342465
Vendor SKU: NEOCAP5
Retail Price: $169.99
  • Compact size
  • Increases dynamic sound range of user's amp
  • Reduces DC voltage spikes on vehicle's electrical system
  • 12 volts to 24 volts DC
  • Low E.S.R.
  • Digital DC volt meter
  • 0/4 gauge power wire inputs
  • 0/4 gauge power wire outputs

Petra SKU: CERCVP16001D
Part No.: 346041
Vendor SKU: CVP1600.1D
Retail Price: $129.99
  • 1,600 watts max
  • 600 watts x 1 channel at 2 ohms RMS
  • 400 watts x 1 channel at 4 ohms RMS
  • 2 ohm stable
  • Frequency response: 10 Hz to 400 Hz
  • Direct short, thermal, and overload circuits protect amplifier
  • Compact size with ambient backlit logo
  • RCA passthrough output for easy system expansion
  • Fully variable crossovers (12 dB per octave)
  • Handles 200 millivolts to 6 volts high- and low-level inputs
  • 12 dB bass boost increases low octave harmonics
  • Dimensions: 8.67 in. L x 9.38 in. D x 2.25 in. H
  • Includes wired bass remote

Petra SKU: CERCVP16004D
Part No.: 346039
Vendor SKU: CVP1600.4D
Retail Price: $159.99
  • 200 watts x 4 channels at 2 ohms RMS
  • 125 watts x 4 channels at 4 ohms RMS
  • 2 ohm stereo, 4 ohm bridged full range operation
  • Frequency response: 10 Hz to 32 kHz
  • Direct short, thermal, and overload circuits protect amplifier
  • RCA passthrough output for easy system expansion
  • Variable 12 dB high, low, and subsonic crossovers
  • Handles 200 millivolts to 6 volts high- and low-level inputs
  • Dimensions: 11.81 in. L x 9.38 in. D x 2.25 in. H

Petra SKU: PYRHTG137
Part No.: 353481
Vendor SKU: HTG137
Retail Price: $173.99
  • 2,000 watts max x 1 channel at 2 ohms; 350 watts RMS x 1 channel at 4 ohms; 900 watts x 1 channel at 2 ohms; 2 ohm stable
  • Designed to supply power to a separate subwoofer
  • Frequency response: 10 Hz to 45 kHz
  • HPF frequency response: 80 Hz
  • LPF frequency response: 50 Hz to 250 Hz
  • Electronic crossover network
  • 50 Hz bass boost circuitry at 0 dB, 6 dB, or 12 dB
  • RCA inputs; L/R line outputs
  • Power and protection LED indicators
  • Soft-turn on/off
  • 30-amp fuse
  • Dimensions: 9.84 in. D x 8.81 in. W x 2.4 in. H

Petra SKU: PIOGMDX874
Part No.: 394620
Vendor SKU: GM-DX874
Retail Price: $300.00
  • Max power output: 1,200 watts; 200 watts x 4 channels at 4 ohms; 600 watts x 2 channels at 4 ohms bridged
  • RMS power output: 100 watts x 4 channels at 4 ohms, 125 watts x 4 channels at 1 ohm, 150 watts x 4 channels at 2 ohms, and 300 watts x 2 channels at 4 ohms bridged
  • 1-ohm to 8-ohm allowable load impedance
  • Designed to power automotive speakers and subwoofers
  • Class D technology makes it smaller in size for greater installation options
  • Frequency response: 10 Hz to 50 kHz; Hi-Res Audio certified
  • 50 Hz bass boost
  • Made from high-quality, textured aluminum panel and tough frame plus high-quality audio components for long life
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature to automatically adjust amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Gold-plated RCA terminals for accurate signal with increased electrical conductivity; prevent corrosion and provide enhanced durability with excellent wear resistance
  • Fuse rating: 30 amps x 2
  • Dimensions: 9-7/8 in. x 2-3/8 in. x 8-1/2 in.
  • Weight: 5.5 lbs. (not including leads for wiring)
  • Includes 2 installed ATO fuses, bass boost remote and control cable, speaker level to RCA input adapter, installation screws, wire terminal tool, owner's manual, and warranty sheet

Petra SKU: PIOGMDX971
Part No.: 394622
Vendor SKU: GM-DX971
Retail Price: $380.00
  • 2,400 watts max x 1 channel at 1 ohm, 1,000 watts x 1 channel at 4 ohms; 500 watts RMS x 1 channel at 4 ohms; 1,200 watts RMS x 1 channel at 1 ohm; 800 watts RMS x 1 channel at 2 ohms; 1-ohm to 8-ohm allowable load impedance
  • Designed to power automotive subwoofers
  • Class D technology makes it smaller in size for greater installation options
  • Frequency response on subwoofer channel: 10 Hz to 240 Hz
  • Made from high-quality, textured aluminum panel and tough frame plus high-quality audio components for long life
  • Variable LPF from 40 Hz to 240 Hz makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences; bass boost at 50 Hz
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature to automatically adjust amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Gold-plated RCA terminals for accurate signal with increased electrical conductivity; prevent corrosion and provide enhanced durability with excellent wear resistance
  • Fuse rating: 40 amps x 3
  • Dimensions: 11-7/8 in. x 2-3/8 in. x 8-1/2 in.
  • Weight: 6.8 lbs. (not including leads for wiring)
  • Includes 3 installed ATO fuses, bass boost remote and control cable, speaker level to RCA input adapter, installation screws, wire terminal tool, owner's manual, and warranty sheet

Petra SKU: PIOGMDX975
Part No.: 394623
Vendor SKU: GM-DX975
Retail Price: $470.00
  • Max power output: 2,000 watts; 150 watts x 4 channels at 4 ohms + 700 watts x 1 channel
  • RMS power output: 75 watts x 4 channels + 350 watts x 1 channel at 4 ohms, 100 watts x 4 channels + 600 watts x 1 channel at 2 ohms, 200 watts x 4 channels + 350 watts x 1 channel at 4 ohms bridged
  • 2-ohm to 8-ohm allowable load impedance
  • Designed to power automotive speakers and subwoofers
  • Class D technology makes it smaller in size for greater installation options
  • Frequency response, main channels: 10 Hz to 50 kHz; Hi-Res Audio certified
  • Frequency response, subwoofer channel: 10 Hz to 500 Hz
  • 50 Hz bass boost
  • Made from high-quality, textured aluminum panel and tough frame plus high-quality audio components for long life
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature to automatically adjust amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Gold-plated RCA terminals for accurate signal with increased electrical conductivity; prevent corrosion and provide enhanced durability with excellent wear resistance
  • Fuse rating: 30 amps x 3
  • Dimensions: 11-7/8 in. x 2-3/8 in. x 8-1/2 in.
  • Weight: 7.3 lbs. (not including leads for wiring)
  • Includes 3 installed ATO fuses, bass boost remote and control cable, speaker level to RCA input adapter, installation screws, wire terminal tool, owner's manual, and warranty sheet

Petra SKU: PIOGMDX871
Part No.: 394621
Vendor SKU: GM-DX871
Retail Price: $270.00
  • 1,600 watts max x 1 channel at 1 ohm; 800 watts RMS x 1 channel at 1 ohm; 500 watts RMS x 1 channel at 2 ohms; 300 watts RMS x 1 channel at 4 ohms; 1-ohm to 8-ohm allowable load impedance
  • Designed to power automotive subwoofers
  • Class D technology makes it smaller in size for greater installation options
  • Frequency response on subwoofer channel: 10 Hz to 240 Hz
  • Made from high-quality, textured aluminum panel and tough frame plus high-quality audio components for long life
  • Variable LPF from 40 Hz to 240 Hz makes audio frequency more adjustable according to subwoofer characteristics and personal listening preferences; bass boost at 50 Hz
  • PCS (Protection Control System) continuously monitors input voltage, current consumption, and operating temperature to automatically adjust amp's output to ensure operational stability during long listening sessions or when installed in high-temperature environments
  • Gold-plated RCA terminals for accurate signal with increased electrical conductivity; prevent corrosion and provide enhanced durability with excellent wear resistance
  • Fuse rating: 40 amps x 2
  • Dimensions: 9-7/8 in. x 2-3/8 in. x 8-1/2 in.
  • Weight: 6 lbs. (not including leads for wiring)
  • Includes 2 installed ATO fuses, bass boost remote and control cable, speaker level to RCA input adapter, installation screws, wire terminal tool, owner's manual, and warranty sheet

Petra SKU: DBDDMOTO8004
Part No.: 395947
Vendor SKU: D MOTO800/4
Retail Price: $399.98
  • 4 x 300 watts at 4 ohms; 4 x 400 watts at 2 ohms; 2 x 400 watts at 4 ohms bridged; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • Minimum working impedance: 2-ohm stereo or 4-ohm bridged
  • Frequency response: 20 Hz to 20 kHz, sensitivity: less than 105 dB
  • Class D circuitry
  • Conformal PCB coating makes it ideal for motorcycle, UTVs, and marine applications
  • Crossover selector with high-pass filter, low-pass filter, and full
  • Variable high-pass filter (12 dB slope): 40 Hz to 3 kHz
  • Variable low-pass filter (12 dB slope): 40 Hz to 3 kHz
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Dimensions: 7.83 in. L x 5.32 in. W x 2.46 in. H
  • Includes owner's manual/warranty

Petra SKU: DBDDWDX10001
Part No.: 395949
Vendor SKU: D WDX1000.1
Retail Price: $199.99
  • 1 x 1,000 watts at 1 ohm; 1 x 500 watts at 2 ohms; 1 x 250 watts at 4 ohms; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 1-ohm mono capability
  • Class D circuitry
  • Frequency response: 20 Hz to 300 kHz; signal-to-noise ratio: less than 95 dB
  • Variable subsonic filter: 10 Hz to 40 Hz
  • Variable high-pass filter (12 dB slope): 40 Hz to 300 Hz
  • Variable low-pass filter (12 dB slope): 10 Hz to 40 Hz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Direct-connect speaker terminals
  • Dimensions: 9 in. L x 5.5 in. W x 2.38 in. H
  • Includes remote level control with cable and owner's manual/warranty

Petra SKU: DBDDWDX1004
Part No.: 395948
Vendor SKU: D WDX100.4
Retail Price: $199.99
  • 4 x 100 watts at 4 ohms; 4 x 150 watts at 2 ohms; 2 x 150 watts at 4 ohms bridged; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 2-ohm stereo capability
  • Class D circuitry
  • Frequency response: 20 Hz to 22 kHz; signal-to-noise ratio: less than 105 dB
  • Independently selectable F/R crossover with high-pass filter, low-pass filter, band-pass, and full
  • Variable high-pass filter (12 dB slope): 20 Hz to 5 kHz
  • Variable low-pass filter (12 dB slope): 50 Hz to 5 kHz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Direct-connect speaker terminals
  • Dimensions: 8.25 in. L x 5.5 in. W x 2.38 in. H
  • Includes owner's manual/warranty

Petra SKU: DBDDWDX15001
Part No.: 395950
Vendor SKU: D WDX1500.1
Retail Price: $279.99
  • 1 x 1,500 watts at 1 ohm; 1 x 750 watts at 2 ohms; 1 x 375 watts at 4 ohms; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 1-ohm mono capability
  • Class D circuitry
  • Frequency response: 20 Hz to 300 kHz; signal-to-noise ratio: less than 95 dB
  • Variable subsonic filter: 10 Hz to 40 Hz
  • Variable high-pass filter (12 dB slope): 40 Hz to 300 Hz
  • Variable low-pass filter (12 dB slope): 10 Hz to 40 Hz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Direct-connect speaker terminals
  • Dimensions: 10.5 in. L x 5.5 in. W x 2.38 in. H
  • Includes remote level control with cable and owner's manual/warranty

Petra SKU: DBDDWDX20001
Part No.: 395952
Vendor SKU: D WDX2000.1
Retail Price: $399.99
  • 1 x 2,000 watts at 1 ohm; 1 x 1,000 watts at 2 ohms; 1 x 500 watts at 4 ohms; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 1-ohm mono capability
  • Class D circuitry
  • Frequency response: 20 Hz to 300 kHz; signal-to-noise ratio: less than 95 dB
  • Variable subsonic filter: 10 Hz to 40 Hz
  • Variable high-pass filter (12 dB slope): 40 Hz to 300 Hz
  • Variable low-pass filter (12 dB slope): 10 Hz to 40 Hz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Direct-connect speaker terminals
  • Dimensions: 12.13 in. L x 5.5 in. W x 2.38 in. H
  • Includes remote level control with cable and owner's manual/warranty

Petra SKU: DBDDWDX30001
Part No.: 395954
Vendor SKU: D WDX3000.1
Retail Price: $449.99
  • 1 x 3,000 watts at 1 ohm; 1 x 1,500 watts at 2 ohms; 1 x 750 watts at 4 ohms; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 1-ohm mono capability
  • Class D circuitry
  • Frequency response: 20 Hz to 300 kHz; signal-to-noise ratio: less than 95 dB
  • Variable subsonic filter: 10 Hz to 40 Hz
  • Variable high-pass filter (12 dB slope): 40 Hz to 300 Hz
  • Variable low-pass filter (12 dB slope): 10 Hz to 40 Hz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Direct-connect speaker terminals
  • Dimensions: 15.25 in. L x 5.5 in. W x 2.38 in. H
  • Includes remote level control with cable and owner's manual/warranty

Petra SKU: DBDDWDX40001
Part No.: 395955
Vendor SKU: D WDX4000.1
Retail Price: $699.99
  • 1 x 4,000 watts at 1 ohm; 1 x 2,000 watts at 2 ohms; 1 x 1,000 watts at 4 ohms; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 1-ohm mono capability
  • Class D circuitry
  • Frequency response: 20 Hz to 300 kHz; signal-to-noise ratio: less than 95 dB
  • Variable subsonic filter: 10 Hz to 40 Hz
  • Variable high-pass filter (12 dB slope): 40 Hz to 300 Hz
  • Variable low-pass filter (12 dB slope): 10 Hz to 40 Hz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 0-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Direct-connect speaker terminals
  • Dimensions: 20.63 in. L x 5.5 in. W x 2.38 in. H
  • Includes remote level control with cable and owner's manual/warranty

Petra SKU: DBDDWDX2004
Part No.: 395951
Vendor SKU: D WDX200.4
Retail Price: $279.99
  • 4 x 200 watts at 4 ohms; 4 x 300 watts at 2 ohms; 2 x 300 watts at 4 ohms bridged; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 2-ohm stereo capability
  • Class D circuitry
  • Frequency response: 20 Hz to 22 kHz; signal-to-noise ratio: less than 105 dB
  • Independently selectable F/R crossover with high-pass filter, low-pass filter, band-pass, and full
  • Variable high-pass filter (12 dB slope): 20 Hz to 5 kHz
  • Variable low-pass filter (12 dB slope): 50 Hz to 5 kHz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Direct-connect speaker terminals
  • Dimensions: 9 in. L x 5.5 in. W x 2.38 in. H
  • Includes owner's manual/warranty

Petra SKU: DBDDWDX3004
Part No.: 395953
Vendor SKU: D WDX300.4
Retail Price: $399.99
  • 4 x 300 watts at 4 ohms; 4 x 400 watts at 2 ohms; 2 x 400 watts at 4 ohms bridged; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 2-ohm stereo capability
  • Class D circuitry
  • Frequency response: 20 Hz to 22 kHz; signal-to-noise ratio: less than 105 dB
  • Independently selectable F/R crossover with high-pass filter, low-pass filter, band-pass, and full
  • Variable high-pass filter (12 dB slope): 20 Hz to 5 kHz
  • Variable low-pass filter (12 dB slope): 50 Hz to 5 kHz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Direct-connect speaker terminals
  • Dimensions: 10 in. L x 5.5 in. W x 2.38 in. H
  • Includes owner's manual/warranty

Petra SKU: DBDDMOTO4004
Part No.: 395946
Vendor SKU: D MOTO400/4
Retail Price: $289.98
  • 4 x 150 watts at 4 ohms; 4 x 200 watts at 2 ohms; 2 x 200 watts at 4 ohms bridged; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • Minimum working impedance: 2-ohm stereo or 4-ohm bridged
  • Frequency response: 20 Hz to 20 kHz, sensitivity: less than 105 dB
  • Class D circuitry
  • Conformal PCB coating makes it ideal for motorcycle, UTVs, and marine applications
  • Crossover selector with high-pass filter, low-pass filter, and full
  • Variable high-pass filter (12 dB slope): 40 Hz to 3 kHz
  • Variable low-pass filter (12 dB slope): 40 Hz to 3 kHz
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Dimensions: 6.65 in. L x 5.32 in. W x 2.46 in. H
  • Includes owner's manual/warranty

Petra SKU: DBDDMOTO10001
Part No.: 395944
Vendor SKU: D MOTO1000/1
Retail Price: $299.98
  • 1 x 1,000 watts at 1 ohm; 1 x 500 watts at 2 ohms; 1 x 250 watts at 4 ohms; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 1-ohm mono capability
  • Frequency response: 20 Hz to 20 kHz, sensitivity: less than 95 dB
  • Full-range Class-D circuitry
  • Conformal PCB coating makes it ideal for motorcycle, UTVs, and marine applications
  • Variable bass boost: 0 dB to 12 dB
  • Variable high-pass filter (12 dB slope): 40 Hz to 10 kHz
  • Variable low-pass filter (12 dB slope): 15 Hz to 1 kHz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Dimensions: 6.65 in. L x 5.32 in. W x 2.46 in. H
  • Includes remote level control with cable and owner's manual/warranty

Petra SKU: DBDDMOTO20001
Part No.: 395945
Vendor SKU: D MOTO2000/1
Retail Price: $399.98
  • 1 x 2,000 watts at 1 ohm; 1 x 1,000 watts at 2 ohms; 1 x 500 watts at 4 ohms; rated at 14.4 volts with working voltage between 12 volts and 15 volts
  • 1-ohm mono capability
  • Frequency response: 20 Hz to 20 kHz, sensitivity: less than 96 dB
  • Full-range Class-D circuitry
  • Conformal PCB coating makes it ideal for motorcycle, UTVs, and marine applications
  • Variable bass boost: 0 dB to 12 dB
  • Variable high-pass filter (12 dB slope): 40 Hz to 10 kHz
  • Variable low-pass filter (12 dB slope): 15 Hz to 1 kHz
  • Bass equalizer: 0 dB to 9 dB
  • Low-level input: 6 volts to 0.2 volts
  • 4-gauge power wire input
  • CHM (Collective Heat Management), ACT (Adaptive Crossover Technology), SESI (Signal Evaluation Status Indicator, and APC (Audio Protection Circuit)
  • Dimensions: 7.54 in. L x 5.32 in. W x 2.46 in. H
  • Includes remote level control with cable and owner's manual/warranty

Petra SKU: CERVCVPM10001D
Part No.: 395958
Vendor SKU: CVPM1000.1D
Retail Price: $139.99
  • 1,000 watts max; 500 watts RMS x 1 at 2 ohms; 310 watts RMS x 1 at 4 ohms
  • Mini size with ambient backlit logo for a variety of installation options
  • Frequency response: 15 Hz to 500 Hz
  • Variable low-pass crossover: 30 Hz to 500 Hz
  • 12 dB crossover slope
  • IRS2092 main power chip
  • Dimensions: 7.64 in. L x 3.6 in. W x 1.44 in. H
  • Includes wired remote, power and ground wire, and mounting hardware

Petra SKU: DBDWDXBE6
Part No.: 397103
Vendor SKU: WDXBE6
Retail Price: $159.99
  • 2-channel digital bass restoration allows you to restore and enhance low-frequency audio with precision
  • Maximum input level: 15 volts RMS; maximum output level: 13.5 volts peak
  • Parametric bass equalization enables you to tailor bass response to your preferences,
  • Variable center frequency control lets you pinpoint and adjust exact frequency range you want to emphasize
  • Selectable PFM subsonic filter switch ensures only the cleanest and most accurate bass frequencies are reproduced, eliminating any unwanted distortion
  • Selectable balanced/non-balanced RCA inputs so you have flexibility in connecting your audio sources
  • Selectable ground isolation switch eliminates any potential ground noise interference for clean and flawless bass output
  • Internal selectable output gain limiter controls volume levels and prevent any unwanted clipping or distortion
  • PWM power supply for efficient, reliable, and powerful bass performance
  • Illuminated logo adds touch of style and visually captivating experience
  • Power draw: 150 mA; recommended fuse rating: 1 amp
  • Includes dash-mount remote

Petra SKU: DBDNEO4V2
Part No.: 348823
Vendor SKU: NEO4V2
Retail Price: $399.95
  • Max power: 1,250 watts; 4 channels x 250 watts at 2 ohms; 4 channels x 125 watts at 4 ohms; 2 channels x 500 watts at 4 ohms bridged; capability: 2 ohms stereo; minimum load impedance: 2 ohms; output power rated at 14.4 volts
  • Frequency response: 18 Hz to 22 kHz
  • Built-in variable crossover with option of high-pass or low-pass filtering; crossover slope: 12 dB
  • Variable 0 dB to 12 dB bass boost at 45 Hz
  • Channel 1 and 2 filter range: 55 Hz to 750 Hz; Channel 3 and 4 filter range: 55 Hz to 750 Hz
  • Amphibious-grade conformal coating on PCB for automotive, marine, and off-road vehicle applications
  • Audiophile-grade RCA components
  • Buffered preamp input circuitry
  • DriveSink heat management system
  • DC-DC PWM power supply; DC short-circuit protection
  • Dimensions: 6.8 in. L x 5.3 in. W x 1.88 in. x H
  • Includes owner's manual

Petra SKU: PIOGMD1004
Part No.: 260569
Vendor SKU: GM-D1004
Retail Price: $210.00
  • 400 watts max power output; 45 watts RMS x 4 channels at 4 ohms; 90 watts RMS x 2 channels at 4 ohms bridged
  • 4-channel Class FD amp offers extreme efficiency and high-quality sound
  • Slim design for under seat or behind dash
  • OEM in-dash type installation
  • Input sensor for OEM integration
  • Variable high-pass and low-pass filters
  • Low-current power input; 15- amp mini blade fuse installed
  • Dimensions: 1.5 in. H x 7.375 in. W x 2.5 in. D
  • Includes 8-in. line-level input harness x 4, 39-in. speaker-level input harness, 39-in. power/output harness, 2 mounting brackets, two 0.75 in. self-tapping screws, owner's manual (English/French/Spanish), and 1-year warranty sheet