Eylar® SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert (Yellow)

Petra SKU: EYLRSA00001YLW
Part No.: 396348
Vendor SKU: SA00001-YLW
UPC: 850013177035
Retail Price: $89.98
The Yellow Eylar SA00001 Standard Waterproof and Shockproof Gear Hard Case with Foam Insert is designed to secure your gear for transport or storage. A crushproof, folding carry handle makes this case easy to transport or store inside of a backpack or other small bag. The equipment case is injection-molded from reinforced, high-pressure polypropylene plastic that is waterproof and crushproof. Its adaptive pressure-equalization valve releases built-up air pressure allowing for atmospheric compensation when transported at high or low altitudes and within cargo vacuums. A waterproof seal is formed when the case is latched closed, applying pressure to a rubber gasket that is molded to the perimeter of the case. When fully submerged, it provides waterproof protection for up to 3.2 ft. (1 m). The gear case is also resistant to extreme heat and freezing cold with a working temperature range of -20°F (-29°C) to 140°F (60°C). The SA00001 hard equipment case comes with 3 layers of foam designed to keep your valuables firmly in place — 2 fully customizable pull-and-pluck cubed foam layers and 1 layer of egg-crate foam padding for the lid. 2 press-and-pull snap latches secure the full length of the case. 2 padlock-adaptable fittings allow for secure storage at home or on the go. Uniform ridges on the top and bottom create an in-line stackable design for multi-case transport. The outer dimensions are 13.37 in. x 11.62 in. x 6 in. while the inner storage area is 11.81 in. x 8.87 in. x 5.18 in.
This item is packaged in a poly bag.
Free FedEx Ground shipping on qualified orders.
Warning: Cancer and Reproductive Harm - www.P65warnings.ca.gov

Details

  • Waterproof, dustproof, and shockproof travel and storage protection for your gear (IP67)
  • 2 customizable pull and pluck layers, 1 top egg crate layer, and 1 bottom liner padding layer protect your gear
  • Polypropylene body, ABS latches and handles, and steel pins keep gear secure when in transport
  • 0.25-in. padlock hasps allow you to add your own padlock to keep valuables secure
  • Open pressure valve to allow captured air pressure to equalize when traveling at different altitudes
  • Edge-to-edge crushproof protection up to 3,000 lbs. of directly dispersed weight
  • Meets TSA requirements with lockable hasps and fittings
  • External dimensions: 13.37 in. x 11.62 in. x 6 in.
  • Internal dimensions: 11.81 in. x 8.87 in. x 5.18 in.
  • Limited lifetime warranty
  • Yellow
Warranty Document

Specifications

4
4.65 Pound (lb)
11.2 Inch (in)
5.7 Inch (in)
12.8 Inch (in)
6 Inch (in)
11.62 Inch (in)
13.37 Inch (in)
4 Pound (lb)
15X13X8
12 x 14 x 24 in., 20 lbs.
13.37 x 11.62 x 6 in., 4 lbs.
Clasp
Yes
Polyethylene (Foam)
Waterproof
Non-Powered
Customizable
1 Pieces (pcs)
0 Inch (in)
Hard Case, Conveluted Foam, Customizable Cube Foam, Solid Foam Pad
Yellow
Yellow
Yellow
Poly Bag
lifetime limited
China
Yes
Y
00850013177035
Polypropylene Body, ABS Latches & Handles, Steel Pins
Not Applicable
Not Applicable